通用banner
Your current location : Home >> News >> Industry trends

Contact Us

Erdos Shuangqi Cashmere Products Co., Ltd

Telephone:13947736025

Telephone:13848677232

Mailbox:sqyr0477@163.com

Website:en.erdossqyr.com

Chinese website:en.双绮羊绒.com

Company address:Block 11, Zhungeer South Road, Dongsheng District, Ordos City

Why is "double handmade cashmere coat" so expensive?

2020-10-24 10:47:39

Why is "double handmade cashmere coat" so expensive?


Against the coming cold autumn and winter, are you still wrapped in a heavy woolen coat? In fact, there is a simple and elegant, light and elegant "double-sided coat", has quietly become popular. Although the price is relatively expensive, it still attracts a large number of fashionable and simple popular pop fans, becoming one of the indispensable autumn and winter classics for girls.


What is double-sided?


On both sides, two pieces of wool fabrics with different textures are sewn into one fabric by hand. The front and back of the fabric are both exquisite and flat, and can be worn. The value of double-sided cloth is that it has a good handle and two thin layers of cashmere fabric are sewn together, but there is no stitching. Because it can't be machine compounded, it can only be sewn by hand.


Erdos cashmere yarn double-sided fabric mostly uses cashmere, wool and other cashmere, so it is very good to have a double-sided woolen coat, and you should pay attention to it. From the cut of an unfinished double-sided overcoat, you can see the craftsman's work. The dense stitches are how to fold the edge of the split fabric inward carefully and then piece them together in a certain degree.


What steps does a good double faced overcoat go through?


1. Cloth inspection


Put the fabric on the fabric inspection machine, observe the fabric for color difference, holes and other defects through light point by point, and issue the fabric inspection report. The purpose of this process is to ensure that each piece of fabric is free from defects.


2. Tailoring


First, use the electric knife to cut the plate accurately. Rough cutting and fine cutting two processes, make the version more accurate, clean and tidy edge


3. Inspection and treatment of garment pieces


The finely cut pieces need to go through three procedures:


Check piece by piece to ensure no defects;


Put it into the high temperature setting machine. The size of the shaped garment piece is stable and will not change easily due to the environment;


Check the version one by one and check with the original one to ensure the consistency of the version


鄂尔多斯羊绒纱线


4. Running line positioning


Through the positioning line to confirm the slit distance, control the depth of the slit, and ensure that the width of the manual slit is consistent


5. Positioning slit


Use the machine to cut the double-sided fabric horizontally to the positioning line, and gently cut the nodular yarn connecting the two layers of fabrics. This is a very delicate operation, in the process of slitting to ensure that the fabric is flat and can not have a little damage.


6. Positioning adhesive lining


All the cut fabrics need to be stitched with lining strips, and the double-sided wool fabric is fixed by high-temperature pressing. One is to increase the bone feeling, the other is to increase the support force of the woolen cloth, so that the stitching lines are more smooth and exquisite.


7. Hand sewing: stitching


The stitching of double-sided cloth adopts exquisite needling method to hide the stitches, so that the stitches of the finished products are very fine. There are 11 stitches in the 3cm inner seam, which are very dense and flat, and the stitches are even, and the stitch spacing is equal. At the same time, the pulling force should also be uniform. The front and back sides of the woolen coat are equally exquisite and smooth.


Manual sewing has very high technical requirements for workers. Even if the sewing machine has many years of sewing experience, they usually sew one piece in two days on average.


8. Hand stitching: knotting


Many times of manual puncture needle method is adopted to make the front and back of overcoat knot consistent, more firm and beautiful


9. Ironing


After finishing the manual sewing, a semi-finished product inspection is carried out, and then the ironing is carried out to show the basic outline of the whole garment, so that the fabric is more smooth and exquisite, which is conducive to the accurate positioning of the next auxiliary material process.


10. Top accessories: Fastener


The fastener can be divided into three parts:


Opening button hole, making button and fixing button. According to the different styles of overcoats, this link can be set with concealed buttons or cloth bag buttons.


11. Clothing inspection


After the completion of the whole process of garment making, the professional and meticulous inspection of the ready-made clothes is conducted by special personnel again. The ready-made clothes that pass the inspection can be delivered


After the completion of the whole process of garment making, the professional and meticulous inspection of the ready-made clothes is conducted by special personnel again. Only the ready-made clothes that pass the inspection can be delivered. The production process of a double-sided overcoat takes five times as much as that of an ordinary coat. At the moment when machines are in power and the assembly line can solve problems, is it not better to cherish and treat yourself than to buy a big brand to have a pure wool coat sewn by hand with the wisdom and temperature of a craftsman?


*Disclaimer: reprinted content is from the network, if you have any objection, please contact me in time, I will delete it.


label

Recent browsing:

Copyright © Erdos Shuangqi Cashmere Products Co., Ltd  蒙ICP备20002559号
technical support:Shuangqi Cashmere